Avaya ERS 8000 and Avaya VSP 9000 Implementation 6103 Prüfungsfragen mit Lösungen:
1. Avaya Command Line Interface (ACLI) is an industry standard CLI that can be used to manage the Virtual Services Platform (VSP) 9000.
From within which CLI context would you enable global routing settings?
A) router configuration
B) global configuration
C) interface configuration
D) local configuration
2. A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the existing Virtual Services Platform (VSP) 9000 core. The technician needs to configure VRF on the VSP 9000.
Which statement represents the proper order for configuring a new VRF?
A) Create a new VLAN, add an IP address, create a VRF, and move the VLAN to the new VRF.
B) Create a VRF, create a new VLAN, add an IP address, and move the VLAN to the new VRF.
C) Create a VRF, create a new VLAN, move the VLAN to the new VRF, and add an IP address.
D) Create a VRF, add an IP address, create a new VLAN, and move the VLAN to the new VRF.
3. Which statement describes a characteristic of Routed Split Multilink Trunking (RSMLT) configuration?
A) RSMLT is always used in conjunction with routing protocols and SMLT connections.
B) RSMLT is only configured on edge SMLT connections.
C) RSMLT routers are implemented with the VRF-Lite routers.
D) RSMLT uses priority values to distinguish between the primary and backup routers.
4. While troubleshooting the VSP 9000 system, a technician notices that one port Link/Activity LED is blinking constantly or is nearly solid. This could be an indication of mis-configuration or high traffic volume.
Using the CLI, what is the logical first step in troubleshooting this situation?
A) Verify the cable type and connectors on both ends of the connection.
B) Verify the port configuration parameters on both ends of the connection.
C) Verify that there is not a broadcast storm by mirroring the traffic on that port.
D) Verify the port configuration parameters on the VSP 9000 system.
5. Which statement about the local router MAC addresses on RSMLT aggregation switches (cluster) is true?
A) On a RSMLT aggregation switch pair, local router MAC addresses are exchanged, and only used in case of switch failure.
B) RSMLT aggregation switches are not exchanging local router MAC addresses, but are using the IP destination address to forward traffic.
C) On a RSMLT aggregation switch pair, local router MAC addresses are exchanged, and always used for data forwarding.
D) On a RSMLT aggregation switch pair, the virtual MAC address is exchanged, and used for data forwarding.
Fragen und Antworten:
| 1. Frage Antwort: A | 2. Frage Antwort: B | 3. Frage Antwort: A | 4. Frage Antwort: B | 5. Frage Antwort: C |
1284 Kundenbewertungen
