IBM Virtualization Technical Support for AIX and Linux - v2 C4040-109 Prüfungsfragen mit Lösungen:
1. An administrator plans to implement Active Memory Expansion on several LPARs on a Power 770 system. Which tool should be used to determine the recommended LPAR settings for Active Memory Expansion?
A) amelpar
B) amemon
C) amestat
D) amepat
2. A customer is consolidating two POWER6 595 servers to a single Power 795. The two 595 servers each have 24 active processors and have the following LPARs using dedicated processors, running continuously:
The new Power 795 system will have two Processor Books (nodes), each with 8 cores activated in all MCMs (Multi Chip Modules).
LPAR1 is in need of more processing power. If all the other LPARs keep their existing Processor allocation, what is the maximum number of processors which can be allocated to LPAR1?
A) 27
B) 36
C) 100
D) 32
3. A Power 720 is being used to build 2 environments: Test and Production, with 2 LPARs in each environment. Processor resources must be separated between the Test and Production environments to reduce possible contention, while still being able to share processor resources inside each own environment. What are the two features required, as a minimum, to accomplish this? (Select 2)
A) IVE
B) PowerVM Standard
C) HMC
D) PowerVM Express
E) IVM
F) IBM Systems Director
4. An administrator has an existing NIM server running AIX 5.3 TL9. They would like to use this NIM server to upgrade an existing VIO server (VIOS) partition from version 1.5 to version 2.2 FP24.
A) UpgradetheNIMservertoAIX6.1TL6.
B) Ensure that Virtual I/O Tools have been installed on the NIM server.
C) Upgrade the VIOS LPAR to Fix Pack 12.
D) Commit all applied e-fix packages in the VIOS partition.
5. The wlmstat -@ 2 command has been run from a global environment with the following results:
What action can an administrator take to set limits, so that both server1 and server2 use the same amount of CPU resources?
A) Use the syncwpar -E command to copy the CPU resource allocation from server1 to server2.
B) Use the chwpar -R command to set the CPU attributes for each server.
C) Use the chsysres command to assign the same CPU attributes to both servers.
D) Use the cpu_deallocate -P command to reduce the CPU resources on server2
Fragen und Antworten:
| 1. Frage Antwort: D | 2. Frage Antwort: D | 3. Frage Antwort: B,C | 4. Frage Antwort: A | 5. Frage Antwort: B |
1227 Kundenbewertungen
