IICRC Water Damage Restoration Technician (WRT) WRT Prüfungsfragen mit Lösungen:
1. What should a restorer do when there is contamination (e.g., Category 2, Category 3, Mold) on a water damage restoration project to protect workers and occupants?
A) Use appropriate PPE, containment, or other engineering controls
B) Call the insurance company and discuss costs
C) Fog a water-based disinfectant into the affected area
D) Wipe down the contamination with detergent cleaner
2. What is recommended to minimize or control airborne contaminants during restoration?
A) Install low-grain refrigerant dehumidifiers (LGRs)
B) Install additional centrifugal-style air movers
C) Install Air Filtration Devices (AFDs)
D) Install an HVAC system for increased air circulation
3. When should water damage restoration services begin?
A) After the damage survey has been submitted
B) After a restorer entered into a properly written contract
C) After equipment and consumables arrive on-site
D) After the drying standard has been determined
4. What should a restorer do to reduce the aerosolization of contaminants?
A) Minimize air movement
B) Increase temperature
C) Increase air movement
D) Decrease temperature
5. What shall a restorer make the first priority during the initial inspection process?
A) Removing the excess water
B) Turning on the HVAC system
C) Conducting a hazard assessment
D) Checking for moisture in walls
Fragen und Antworten:
| 1. Frage Antwort: A | 2. Frage Antwort: C | 3. Frage Antwort: B | 4. Frage Antwort: A | 5. Frage Antwort: C |
1420 Kundenbewertungen
