NACE Coating Inspector Level 1 NACE-CIP1-001 Prüfungsfragen mit Lösungen:
1. Daily reports are important because:
Select All That Apply
A) Inspectors rarely change on a project.
B) Management uses them to make personnel decisions.
C) the information impacts future projects.
D) The information aids communication with supervisors.
2. An Inspector should change position when:
A) The Inspectors position is not the majority position
B) Only when directed by the supervisor
C) The Owner can save some money by the change
D) The Inspector is convinced by verifiable facts
3. Surface profile describes:
A) The level of surface cleanliness required after abrasive blasting
B) The initial condition of the surface prior to abrasive blasting
C) The level of surface roughness required after abrasive blasting
D) The general condition of the surface required after abrasive blasting
4. Common errors that may produce inaccurate readings when using a Dial-Type Magnetic Pull-Off Dry Filth Thickness (DFT) gauge include:
Select All That Apply
A) Measuring ditty, tacky, or soft films
B) Taking measurements too far from the edge of a surface
C) Rotating the dial too fast when taking measurements
D) Failing to determine the base metal reading (BMR)
5. How many gauge readings does SSPC-PA 2 require within a 4 cm (1.5 inch) diameter circle?
A) 3
B) 7
C) 1
D) 5
Fragen und Antworten:
| 1. Frage Antwort: B,C,D | 2. Frage Antwort: D | 3. Frage Antwort: C | 4. Frage Antwort: A,C,D | 5. Frage Antwort: A |
1418 Kundenbewertungen
