Huawei H12-731-ENU Prüfungsthemen:
| Abschnitt | Ziele |
|---|---|
| Thema 1: Sicherheitsmanagement und Prüfung | - Überwachung, Prüfung und Protokollierung - Erstellung von Sicherheitsrichtlinien |
| Thema 2: Grundlagen der Netzwerksicherheit | - Sicherheitsmodelle und -konzepte - Verschlüsselung, Authentifizierung und Zugriffskontrolle |
| Thema 3: Firewall- und VPN-Technologien | - Implementierung und Fehlerbehebung von IPsec-, SSL/TLS-VPNs - Architekturen und Richtlinien von Firewalls |
| Thema 4: Angriffserkennung und -abwehr | - Erkennung und Reaktion auf Bedrohungen - IDS/IPS-Systeme und deren Einsatz |
Huawei HCIE-Security (Huawei Certified Internetwork Expert-Security) H12-731-ENU Prüfungsfragen mit Lösungen
1. Which of the following applications cannot be secured using packet filtering alone?
A) H.323
B) WWW service
C) Telnet service
D) FTP service
2. When using the UTM function, the link state detection function can be disabled to prevent packet loss due to failure of the firewall state detection when network packets are inconsistent with the round-trip paths.
A) FALSE
B) TRUE
3. Regarding the Internet access area in the data, the correct planning and deployment suggestions are:
A) FW1 is mainly used to prevent external illegal traffic from accessing the DMZ service area and to prevent attack traffic from inside the SSL tunnel.
B) Deploy IPS devices in the DMZ area bypass. If the defense function is realized, it is necessary to pass policy routing or static routing in the DMZ area switch to allow data to pass through the IPS devices.
C) DDos cleaning and detection equipment must be placed in the external network interface area to ensure that attack traffic is detected first.
D) FW2 mainly prevents internal illegal traffic from accessing the DMZ service area and illegally accessing the Internet.
4. When a user performs 802.1x authentication through a laptop, which resources can only be accessed when the security check fails?
A) 172.19.90.0/24
B) 172.19.10.0/24
C) 172.19.60.0/24
D) 172.19.50.0/24
5. The firewall uses display diagnostic-information to collect system diagnostic information in the diagnosis view, but cannot obtain the information output by which of the following commands?
A) debug ip packet
B) display history-command
C) display version
D) display current-configuration
Fragen und Antworten:
| 1. Frage Antwort: A,D | 2. Frage Antwort: A | 3. Frage Antwort: B,C,D | 4. Frage Antwort: C | 5. Frage Antwort: A |
1296 Kundenbewertungen
