A customer needs two client IBM i partitions on a 4-core Power 720, with storage hosted by VIO Server. What is the least expensive method to manage this environment?

• A. Integrated Virtualization Manager
• B. HMC
• C. Systems Director Navigator for PowerVM
• D. Virtual Partition Manager

After using the Advanced Management Module (AMM) to move the BladeCenter's optical drive to a different POWER blade in the same chassis, the VIO Server on the blade from which the drive was removed still shows it as "available," while the blade to which it was moved doesn't reflect ownership of the device. Why is this occurring?

• A. The VIO Server which is acquiring the hardware doesn't have an adapter available to support optical virtualization.
• B. The IBM i partition which needs the optical device to be varied on with RESTART *YES in order to be acquired.
• C. The scheduled inventory refresh has not yet processed.
• D. The VIO Servers on each POWER blade need to have actions taken in order to refresh the known inventory of physical hardware.

A company requires up to 20 client IBM i partitions. Each must have redundant access to SAN storage and minimal hardware in the POWER7 system.
Which option will support this?

• A. TwoVIOServers, each with one 8Gb dual-port Fibre Channel adapter
• B. VIOServerwith a4Gb dual-port Fibre Channel adapter Each IBM i client partition with a 4Gb dual-port Fibre Channel adapter and a virtual Fibre Channel adapter
• C. VIOServerwith an 8Gb dual-port Fibre Channel adapter Each IBM i client partition with an 8Gb dual-port Fibre Channel and a virtual Fibre Channel adapter, 2 Fibre Channel switches
• D. Two 8Gb dual-port Fibre Channel adapters for each IBM i client partition

A POWER7 server is being configured with 1 hosting IBM i partition and 4 client IBM i partitions. All partitions will run IBM i 7.1, TR4. The hosting partition is providing network support to the client partitions and needs both redundancy and best bandwidth.
What connectivity on the host partition will support these requirements?

• A. Using two or more physical Ethernet resources configure an aggregated link to the switch and use this for the bridge to the internal vLANs used by the client partitions.
• B. Configure two or more Ethernet lines. Create a Virtual IP address for the host partition. Configure Showler routes to the local network for load balancing.
• C. Configure two or more Ethernet lines. Use the lines to create redundant bridges to the internal vLANs used by the client partitions.
• D. Using two or more physical Ethernet resources configure an aggregated link to the switch and use this for IP address of the host partition.

Auditors have reviewed access to the HMC and determined that many users have too much authority. What is the correct method to restrict users to only a specific set of tasks?

• A. Create and assign a new resource role that allows access to only the required resources.
• B. Create and assign a new task role that allows only the required set of tasks.
• C. Change the users'task role to hmcoperator.
• D. In Manage Users and Tasks, check each task that is needed for this user.